* NOTE: Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. Designed with a 5 to 1 safety factor. Alloy swivel hooks 1.25tA-31.5tA : proof load is 2.5 times working load limit. Designed with a 4 to 1 safety factor. ¢À Forged - Quenched and Tempered. ¢À Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk. ¢À Every Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added. ¢À Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 97-98. Even years after purchase of the priginal hook, latch assemblies can be added.

¡ß Swivel Hooks
W.L.L(ton)		item No.		Weight kg	Dimensions (mm)
Carbon	Alloy	Carbon	Alloy		A	B	C	D	F	G	H	J	K	L	M	O	R	S	AA
0.75	1	SHC600	SHA804	0.34	51	20.8	31.8	72.5	31.8	18.5	20.6	23.6	16	144	16	23.6	116	9.65	38.1
1	1.5	SHC609	SHA813	0.57	63.5	33.3	38.1	80	35.1	21.3	23.9	24.6	18	170	18	24.6	136	12.7	50.8
1.5	2	SHC618	SHA822	1.02	76	38.1	44.5	91	38.1	25.4	29.5	26.9	22.4	197	22.4	26.9	155	16	50.8
2	3	SHC627	SHA831	1.04	76	38.1	44.5	102	41.1	28.7	33.3	30.2	23.9	210	23.9	29.5	165	16	50.8
3	5	SHC636	SHA837	2.25	89	41.7	50.8	123	51	36.6	41.4	38.1	33.3	246	28.7	35.8	191	19.1	63.5
5	7	SHC645	SHA854	4.67	116	58	63.5	160	63.5	46	52.5	45.2	42.2	317	36.6	42.9	245	25.4	76.2
7.5	11	SHC654	SHA865	8.8	127	64.5	70	192	76	57	67	51	47.8	375	41.4	56.5	289	28.7	101
10	15	SHC663	SHA877	10.5	143	63	79	212	82.5	66	74.5	66.5	55.5	417	49.3	61	311	31.8	101
15	22	SHC672	SHA886	21.3	180	95.5	104	263	108	76	89	86.5	68.5	542	60.5	81	424	38.1	127
-	30	-	SHA688	32	180	95.5	104	346	127	93	118	102	72.5	590	76.2	82.6	459	38.1	165
¢À Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 88 for proper Hook Identification Codes. ¢À Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK¢ç features: ¢À Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK¢ç measurement to determine if the throat opening has changed, thus indicating abuse or overload. ¢À Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs. * This hook is a positioning device and is not intended to rotate under load. ¢À For swivel hooks designed to rotate under load, see pages 93, 95, 103, 106, 111-115. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c) 2000.