* NOTE: Proof load is 2 times Working Load Limit. All carbon hooks - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy shank hooks 1.25 ton through 300 ton - average straightening load (ultimate load) is 4 times Working Load Limit. ¢À The most complete line of shank hoist hooks. Available 3/4 to 300 tons. ¢À Available in carbon steel, alloy steel. ¢À Quenched and Tempered. ¢À Proper design, careful forging, and precision controlled quench and tempering give maximum strength without excessive weight and bulk. ¢À Every Shank Hook has a pre-drilled cam which can be equipped with a latch. ¢À Hook Identification code stamped on each hook.

¡ß Shank Hooks
W,L.L(ton)		item No.		Shank Length	Weight kg	Dimensions (mm)
Carbon	Alloy	Carbon	Alloy			D	F	G	H	J	K	L	M	O	P	R	T	X	Y	Z	AA
0.75	1	SHC505	SHA701	Std.	0.23	72.5	31.8	18.5	20.6	23.6	16	131	16	23.6	49.8	59.5	24.6	15	52.5	17.5	38.1
1	1.5	SHC514	SHA710	Std.	0.34	80.5	35.1	21.3	23.9	24.6	18	144	18	24.6	56.5	66	24.6	16.8	57	19.8	50.8
1.5	2	SHC523	SHA723	Std.	0.45	91	38.1	25.4	29.5	26.9	22.4	161	22.4	26.9	62	70	26.2	18.3	66	22.4	50.8
2	3	SHC532	SHA732	Std.	0.83	102	41.1	29	33.3	30.2	23.9	181	23.9	29.5	70.5	80.5	29.5	22.4	72	25.4	50.8
3	5	SHC541	SHA741	Std.	1.67	123	51	36.6	41.4	38.1	33.3	219	28.7	35.8	88	98	38.9	29.5	87.5	31.8	63.5
5	7	SHC550	SHA750	Std.	3.29	160	63.5	46.2	52.5	45.2	42.2	265	36.6	42.9	117	121	49.3	35.8	97.5	39.6	76.2
7.5	11	SHC563	SHA765	Std.	6.12	192	76	57.5	67	61	47.8	318	41.4	56.5	133	149	62.5	46	111	49.3	101
10	15	SHC572	SHA774	Std.	8.16	212	82.5	66	74.5	66.5	55.5	342	49.3	61	151	162	66	51	114	55.5	101
15	22	SHC581	SHA783	Std.	16	263	108	76.5	89	86.5	68.5	423	60.5	81	175	207	71.5	65	140	67	127
20	30	SHC386	SHA803	Std.	32.7	346	127	92	117	102	76	586	76	82.5	223	240	87.5	79	254	79	165
20	30	SHC402	SHA821	Long	38.8	346	127	92	117	102	76	790	76	82.5	223	240	87.5	79	457	79	165
25	37	SHC420	SHA849	Std.	61	357	137	116	127	108	92	816	76	76	287	318	98.5	102	381	102	177
25	37	SHC448	SHA867	Long	78	357	137	116	127	108	92	1044	76	76	287	318	98.5	102	610	102	177
30	45	SHC466	SHA885	Std.	83	392	152	129	140	121	94.5	867	82.5	86	319	356	121	106	381	106	203
30	45	SHC484	SHA901	Long	97	392	152	129	140	121	94.5	1095	82.5	86	319	356	121	106	610	106	203
40	60	SHC509	SHA929	Std.	122	470	178	152	165	146	113	916	99.5	105	375	395	145	114	368	114	254
40	60	SHC545	SHA965	Long	142	470	178	152	165	146	113	1208	99.5	105	375	395	145	114	660	114	254
50	75	SHC563	SHA983	Std.	177	524	197	170	184	165	133	1045	108	124	420	492	152	127	381	127	292
50	75	SHC581	SHA009	Long	193	524	197	170	184	165	133	1249	108	124	420	492	152	127	584	127	292
-	100	-	SHA027	Std.	277	584	173	218	251	149	140	1070	140	114	438	468	178	178	381	178	305
-	100	-	SHA045	Long	306	584	173	218	251	149	140	1222	140	114	438	468	178	178	533	178	305
-	150	-	SHA063	Std.	333	619	171	232	278	152	152	1162	152	114	457	467	178	184	457	184	330
-	200	-	SHA081	Std.	463	678	191	248	300	168	178	1283	178	127	502	521	203	203	508	203	330
-	300	-	SHA090	Std.	630	765	241	270	329	203	184	1389	203	159	576	597	210	241	508	241	381
¢À Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK¢ç features. ¢À Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK¢ç measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align according to the dimensions in column "AA" on next page. If the measurement does not meet this criteria, the hook should be inspected further for possible damage. ¢À Angle Indicators -- Indicates the maximum included angle which is allow between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs. ¢À Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties. * Dimension before machining (as forged). See Hoist Hook Warnings - for maximum clean up dimensions after machining. Patented trademark indicates QUIC-CHECK¢ç product. Hook ID Codes: A-Alloy Steel, B-Bronze High Strength, C-Carbon Steel.